Standard finishes

A thoughtful starting specification.

As locals, we care about your forever home. When a storm is on the way, we want you to be able to lock the door and leave.

Our standard specification starts with a concrete block ground floor, PGT WinGuard impact windows and ZIP System sheathing. Explore the rest of it, then personalize the details with interior design.

Explore the models

Built for Florida

The Davis Standard.

Three things go into a Davis home before any finish is chosen. None of them is an upgrade.

01 · Block

A Ground Floor Built for Florida

Reinforced concrete block exterior walls at ground level, where a home takes the most from wind, water and termites.

02 · Roof

Three Layers Keeping Rain Out

Roofing, a peel-and-stick waterproof sheet, and sealed ZIP System panels under both.

03 · Glass

Lock the Door and Leave

Impact glass in every window and exterior door, so there is nothing to put up before a storm.

Reinforced concrete block

A Ground Floor Built for Florida

Davis homes start with reinforced concrete block exterior walls at ground level.

The ground floor, with its block walls complete.
Concrete blockConcrete-filled cellSteel reinforcingFoundation
Inside the exterior block wall: steel bars set in concrete, tied into the foundation.

Why does this matter on my ground floor?

The ground floor is where a house takes the most: the weight of the home above, the wind, any water that gets in, and whatever comes up from the soil. So we build that floor’s exterior walls from concrete block with steel bars inside.

Strong in a Storm

Steel bars run down inside the block walls, are locked in with concrete and tie into the foundation. The system is engineered for Florida’s wind requirements.

Nothing for Termites to Eat

The termites that do the most damage in Florida live in the soil and come up from the ground. The exterior walls they meet are concrete block, and there is nothing in concrete for them to eat.

Block Doesn’t Rot or Burn

Water that gets into a house, from a storm or a plumbing leak, ends up at the ground floor. At the exterior walls it meets concrete block, which dries out without rotting, swelling or going soft. Block also does not burn.

ZIP System® sheathing

Three Layers Keeping Rain Out

Wherever a Davis home has sheathing, it is ZIP System.

1. Roofing2. Peel-and-stick3. ZIP panels, taped
Three layers: roofing, a peel-and-stick sheet, and ZIP System panels with every seam taped.
RoofingPeel-and-stick layerBuilt-in water barrierZIP System panelTaped seam
The layers, from the roofing down.

Why does this matter on my roof?

The roofing you see is only the first layer keeping rain out. Under it is a peel-and-stick waterproof sheet. Under that are the ZIP System panels, each with its own water barrier built in and every joint sealed with tape.

That is three layers between the weather and your ceilings. It means peace of mind on the most important thing to get right in a new home: waterproofing.

If a Storm Takes Roofing Off

High wind can peel roofing away. On a Davis roof there are still two sealed layers underneath, which help keep rain out of your attic and ceilings until the roofing is repaired.

Nothing to Tear or Blow Off

The water barrier is part of the panel itself. There is no separate sheet to rip, lift or get left off while the home is being built.

Tighter, and Backed for 30 Years

The taped seams that stop water also stop air leaks, so the home holds its cool air better. Huber, the manufacturer, backs ZIP System with a 30-year limited warranty.

Impact windows and doors

Lock the Door and Leave

Every window and exterior door on a Davis home is an impact window or door, front and rear.

Ordinary glassImpact glassBreaks. Wind and rain come in.Stays in its frame, even if it cracks.
The same storm, the same hit. Ordinary glass breaks and lets the storm in. Impact glass is built to stay in its frame and keep the opening closed, even if the glass cracks.
GlassBonded interlayerGlass
Impact glass: two sheets of glass sealed to a strong clear layer in the middle.

▶ Watch a short video on PGT impact windows

Why does this matter for my windows and doors?

In a hurricane, a house often fails at a window or door first. Once one breaks, the wind and rain are inside. That is why Florida requires homes in areas like ours to protect every opening.

The code does not say it has to be impact glass. A home can also pass with ordinary glass and a set of plywood panels cut to fit each opening, with anchors left in the wall around every window and door.

Then, when a storm is coming, someone has to carry out each panel, lift it into place and bolt it on, one opening at a time, upstairs included. That is the same day people are lining up for water and gas or packing the car to evacuate.

We don’t build that way, and we will turn down a project that asks us to. With impact glass there is nothing to put up. You lock your home and leave.

How Impact Glass Works

An impact window is two sheets of glass sealed to a strong clear layer in the middle, so the three act as one piece. A car windshield is made the same way. When something hits it hard, the glass can crack. The middle layer stays intact. It holds the cracked glass together and keeps it in the frame, so the window stays closed to the storm even after it is damaged.

PGT WinGuard® Windows

PGT has been making windows and doors in Florida since 1980. WinGuard is its impact line, a premium window built for hurricane-force winds and flying debris.

Doors, Too

The exterior doors are impact doors as well. A home is only as protected as its least protected opening.

Good on a Calm Day, Too

According to PGT, the glass blocks about 99% of the sun’s harmful UV rays, quiets outside noise such as traffic and is a deterrent to intruders. PGT also notes that impact products may lower insurance premiums; your insurer can tell you what applies to your home.

Why This Matters to Us

Home Is Where You Should Feel Safest

Born and raised in St. Petersburg, we take pride in the homes we build for our city and the people we get to call our neighbors. That’s why we’re committed to getting the details right from the start, including the ones behind your walls. We want you to feel confident in your home from the day you move in and for years to come.

None of this is an upgrade. Block, ZIP System and PGT impact glass are the standard on our models and the starting point for every custom home. Your agreement sets out the specification for your home.

Explore Our Models

Inside the home

Materials for everyday living.

Interior rendering of a kitchen with cabinets to the ceiling and a large island
Interior rendering

Quartz countertops

Quartz counters and backsplash, as defined in the project specifications.

Solid wood cabinetry

Solid wood cabinetry throughout the kitchen and baths, in a range of door styles and finishes.

Appliances

A complete kitchen appliance package per Davis selections, with the exact appliance schedule confirmed in your agreement.

Plumbing fixtures

Coordinated fixtures in the kitchen and every bath.

Flooring

Durable flooring in the living areas and tile in the wet areas.

Paint

Interior and exterior colors coordinated with the design team.

Sinks

Kitchen and bathroom sinks as specified for the model.

Shower glass

Primary shower glass as specified for the model.

Your agreement confirms the specific products, finishes and included scope for the home. Renderings illustrate design possibilities and may show options beyond the base specification.

Start with a conversation

Your next chapter starts with a plan.

Tell us about your lot, your ideas and the budget you have in mind. We’ll help you understand the next step.

Discuss your project

A closer look

Compare your homes